Term
| Mandatory on the first stage of a bailout bottle for Surface Supply. |
|
Definition
| Pressure Release rated for >180psi in ANY LP port |
|
|
Term
| At the end of a Kirby Morgan manual is: |
|
Definition
| A list of changes from manual to manual, including critical updates. |
|
|
Term
| What should be used for lubrication in a helmet? |
|
Definition
| Food Grade Silicone - dow Corning 11 |
|
|
Term
| Things that show you the helmet is really old: |
|
Definition
- A muffler before the internal freeflow pipe.
- Oral Nasal is made of rubber
- A long and thin one way check valve, ending with a bulky extension. |
|
|
Term
| Primary location water will leak in: |
|
Definition
|
|
Term
|
Definition
| A face sealing valve. (within 1/2 a turn you are receiving 70% of the flow) |
|
|
Term
| Bailout bottle valve seal is: |
|
Definition
| a stem sealing valve. (not easily turned on to full, less liable when bumped) |
|
|
Term
| When connecting the bent tube assembly, what order do you fasten it? |
|
Definition
| Connect the face seal side first prioritizing a smooth tightning. Then proceed to fasten the oring side (which is connecting to the regulator) |
|
|
Term
| Oral Nasal's Rolar lever should be how sensitive? |
|
Definition
|
|
Term
| The mask is free flowing, what is the process of repair? |
|
Definition
-Check the dial a breath (regulator adjustment valve)
-Check dmg on the front of the regulator.
-Adjust the nut inside the regulator
-Remove valve and check face seal (flip or replace if necessary) |
|
|
Term
| Oxygen mixtures over __% oxygen compatible greases such as Krytox must be used. |
|
Definition
|
|
Term
| What is the minimum recommended umbilical hose diameter to be used with diving helmets? |
|
Definition
|
|
Term
| A bail-out regulator must be fitted with a relief valve installed in: |
|
Definition
|
|
