Term
| Used to separate moisture from air between each stage of a compressor: |
|
Definition
|
|
Term
| How do you preserve the life of your filters? |
|
Definition
Pressure maintaining valve and one way valve:
Pressure maintaining valve ensures 65% of pressure stays in the line to the filters. |
|
|
Term
| Hp Air filter Cartridge Replacement Formula: |
|
Definition
Cu.ft / SCFM / 60 = Hours
Example 22" Tower = 28,000 CU.FT
SCFM = 10
28000/10/60 = 46.66 hours |
|
|
Term
| Inspecting Breathing Air Systems: |
|
Definition
-Record Keeping
-Set - UP
-LP Primary Compressor Sizing
-HP Primary Quantities-
-Air Filtration, Monitoring and Testing
-SCUBA and HP Cylinders
-Air Distribution |
|
|
Term
| Operational Maintenance and Testing Compressors: |
|
Definition
-Inspect Daily
-Cleaned Regularly (stop overheating)
-Oil Changed every 200 hours of operation
-Ensure intake is upwind and away from exhaust
-Ensure belts are guarded
-Open water drains |
|
|
Term
| Operational Maintenance and Testing Filters: |
|
Definition
-Change cartridge when indicated, at least annually
-Conduct air test / 6 months / or whenever indicated contaminated.
-Check daily for oil discharge with white handkerchief. |
|
|
Term
| Operational Maintenance and Testing K Bottles: |
|
Definition
-Visual Annually
-Hydro 10yrs if permanent |
|
|
Term
| if bottled air, _._ times what is required for the operation |
|
Definition
|
|
Term
| Air must be delivered at; |
|
Definition
-Sufficient Pressure
-Sufficient Volume |
|
|
Term
|
Definition
|
|
Term
|Explosive Actuating|
Always handle the tool as if it were: |
|
Definition
|
|
Term
|Explosive Actuating|
Always wear: |
|
Definition
| Goggles / Ear / Steel Boots / Work Gloves |
|
|
Term
| Do you store the Tool and the ammo together? |
|
Definition
| No they have to be in separate casing. |
|
|
Term
| Can different power levels of ammo be stored together? |
|
Definition
|
|
Term
| Can you pass a loaded tool? |
|
Definition
|
|
Term
| Can you carry a loaded tool around the work area? |
|
Definition
|
|
Term
| What is a test we can use to determine the thickness of the material? |
|
Definition
|
|
Term
| Always start with the _______ lv power cartridge. |
|
Definition
|
|
Term
| ever attempt to drive fastners into very ____ or _______ materials. |
|
Definition
| hard or brittle materials |
|
|
Term
| never make fastenings in _______ or _______ areas |
|
Definition
|
|
Term
|
Definition
Gray = 1
Brown = 2
Green = 3
Yellow = 4 |
|
|
Term
| The max a fastener can embed into concrete is: |
|
Definition
|
|
Term
| Do not drive fastners in steel less the: |
|
Definition
|
|
Term
| Do not use in _______ mortar joints. |
|
Definition
|
|
Term
| Always hold the tool ______________ to work surface |
|
Definition
|
|
Term
| Should the tool fire to fail, ____ on hard surface for __ seconds. _______ the load, throw in _____ |
|
Definition
Hold on Hard Suface
30 Seconds
Remove the load
Throw in Water. |
|
|
Term
| Always use the _____ ______ when driving directly into concrete |
|
Definition
|
|
Term
| Never use a powder actuated tool in a: |
|
Definition
| explosive or flammable atmosphere. |
|
|
Term
| Leaving unfired rounds on a table is permissible. |
|
Definition
|
|
Term
| Nevery ___ a load out of the chamber: |
|
Definition
|
|
Term
| Always insert the _______ first |
|
Definition
|
|
Term
| When loading a round, ensure that the: |
|
Definition
| Grooves are lined up together, as well as the markings. |
|
|
Term
| The ammo port ( where you load the shell) should be _____ or your wrist. |
|
Definition
|
|
Term
| Tool cannot be fired in the _________ position |
|
Definition
|
|
Term
| Closest Fastener can be to Concrete Edge/another fastener? Steel Edge / another fastener? |
|
Definition
Concrete = 3"
Steel = 1.5" |
|
|
