Term
| What occurs if EGT exceeds the red line limit? |
|
Definition
| Maximum exceedence value attained will be displayed |
|
|
Term
What value is represented by the end of the command sector on the EPR (757) or N1 (767)
indicator? |
|
Definition
| EPR (757) or N1 (767) commanded by thrust lever position |
|
|
Term
| What system is controlled by the thrust management computer? |
|
Definition
|
|
Term
| What is calculated by the thrust management computer? |
|
Definition
| Maximum EPR (757) or N1 (767) reference |
|
|
Term
| What occurs if one EICAS CRT fails? |
|
Definition
| Engine parameters are displayed in Compacted Mode |
|
|
Term
Do autothrottles respond to manually set EPR (757) or N1 (767) reference values by pulling
the Manual Thrust Reference selectors? |
|
Definition
|
|
Term
| What does D-TO indicate on EICAS? |
|
Definition
| Assumed temperature derated takeoff thrust |
|
|
Term
What is the maximum Assumed Thrust reduction to takeoff thrust allowed by the thrust
management computer? |
|
Definition
25% reduction from maximum takeoff thrust or selected climb thrust, whichever is the
greater thrust value |
|
|
Term
| What does TO 1 indicate on EICAS? |
|
Definition
| Takeoff thrust one, climb one preselected |
|
|
Term
| What does TO 2 indicate on EICAS? |
|
Definition
| Takeoff thrust two, climb two preselected |
|
|
Term
| What does D-TO 2 indicate on EICAS? |
|
Definition
| Assumed temperature derated takeoff thrust two, climb two preselected |
|
|
Term
| What does the L or R ENG STARTER EICAS message indicate? |
|
Definition
| Engine starter valve is not in the commanded position |
|
|
Term
| What does the L or R STARTER CUTOUT EICAS message indicate? |
|
Definition
| Engine start valve is open above engine RPM at which cutout should occur |
|
|
Term
| During engine start, the red Maximum Start EGT limit radial remains in view _____________. |
|
Definition
| until the engine start is completed |
|
|
Term
| The assumed temperature can be entered manually on the ___________. |
|
Definition
TAKEOFF REF page on the FMC or selected with the Assumed Temperature selector
on the TMSP |
|
|
Term
What color is the REV annunciation on EICAS when the thrust reverser is unlocked and
in transit? |
|
Definition
|
|
Term
What malfunction has occurred if the R ENG OIL PRESS light is illuminated, the R ENG OIL
PRESS EICAS message is displayed, and oil pressure indicates normal for the right engine? |
|
Definition
| Oil pressure switch fault |
|
|
Term
Prior to engine start, the SPAR VALVE light for the left engine is illuminated. What is the
system condition? |
|
Definition
| Fuel spar valve is not in commanded position |
|
|
Term
| (PW) What does the green TAI bug on the N1 parameter indicate? |
|
Definition
| Engine anti-ice is on and only one engine bleed source is available |
|
|
Term
(PW) With only one engine bleed source available, what does the amber TAI above the N1
parameter indicate? |
|
Definition
| N1 is below the reference level |
|
|
Term
| (PW) What does the ENG LIMIT PROT light and EICAS message indicate? |
|
Definition
| EEC using N2 as control parameter. |
|
|
Term
| (PW) What does the ENG LIMIT PROT light and EICAS message indicate? |
|
Definition
| Automatic engine limit protection not available for any thrust mode |
|
|
Term
| (PW) Which parameters are protected by the EEC? |
|
Definition
|
|
