1. RETARD THROTTLE TO IDLE POSITION.

2. PLACE AILERONS IN NEUTRAL POSITION.

3. APPLY AND HOLD FULL RUDDER OPPOSITE TO THE DIRECTION OF ROTATION.

4. JUST AFTER THE RUDDER REACHES THE STOP, MOVE THE CONTROL WHEEL BRISKLY FORWARD FAR ENOUGH TO BREAK THE STALL.

5. HOLD THESE CONTROL INPUTS UNTIL ROTATION STOPS.

6. AS ROTATION STOPS, NEUTRALIZE RUDDER, RECOVER FROM DIVE.

1.  Clear with 2x90 Degree Turns

2.  1500 RPM

3.  Stabilized Descent @ 65 KIAS

4.  Throttle Idle

5.  Increase Pitch SLOWLY

6.  Full Rudder in Desired Spin Direction

7.  Slowly add full aft yoke

8.  KEEP AILERONS NEUTRAL