Term
| Using a digital multi-meter, we can test an incandescent lamp for ___________ to see if the filament is still functional. |
|
Definition
|
|
Term
| Name two common par lamp sizes. |
|
Definition
|
|
Term
| In a three-phase power system, the hot legs are ______ degrees out of phase with each other. |
|
Definition
|
|
Term
| Standard Socapex carries ___ circuits, and the Socapex connector has ___ pins. |
|
Definition
|
|
Term
| There are _____ channels in one universe. |
|
Definition
|
|
Term
| There are ______ steps in each channel of DMX. |
|
Definition
|
|
Term
| Up to ____ devices can be daisy chained in one un-split line of DMX. |
|
Definition
|
|
Term
| A terminator uses a _____ ohm resistor wired between pins ___ and ___ of the XLR connector. |
|
Definition
|
|
Term
| What is one of the benefits of a moving head automated light (as compared to a moving mirror fixture)? |
|
Definition
|
|
Term
| What is the one benefit of a moving mirror automated light (as compared to a moving head fixture)? |
|
Definition
|
|
Term
| What kind of lamps do most automated lights use? |
|
Definition
|
|
Term
| The compliment of the color blue is __________. |
|
Definition
|
|
Term
| To load or save a show on the MA consoles, the first button you need to press is the _________ button. |
|
Definition
|
|
Term
| The Grand MA Ultra-Lite Console has ____ DMX Universe outputs. |
|
Definition
|
|
Term
| To change console default settings, or to begin patching your show, you must first press the _______ button. |
|
Definition
|
|
Term
| When a fixture is selected on the Grand MA, the name of the fixture turns what color in the fixture sheet. |
|
Definition
|
|
Term
| What does the "HighLight" function do on the Grand MA console? |
|
Definition
| Brings the fixture to full intensity and removes color information. |
|
|
Term
| By default, what does the Top button on every executor fader do? |
|
Definition
|
|
Term
| By default what does the Middle button on every executor fader do? |
|
Definition
|
|
Term
| By default, what does the Bottom button on every executor fader do? |
|
Definition
|
|
Term
| You select a fixture, point it at the drum riser, change the color to yellow, you put the flame gobo on it. Then, you press (STORE) and select and empty cell in the Pan/Tilt preset window. What values did you store? |
|
Definition
| Only the values for position (Pan&Tilt) |
|
|
Term
| Grand MA calls moving lights __________, and calls dimmers __________. |
|
Definition
|
|
Term
| The fixture on the Grand MA will display the state of DMX values using different font and background colors. These values are shown in Grey font with a Blue background. |
|
Definition
|
|
Term
| The fixture on the Grand MA will display the state of DMX values using different font and background colors. These values are shown in Red font with a Red background. |
|
Definition
|
|
Term
| The fixture on the Grand MA will display the state of DMX values using different font and background colors. These values are shown in Red font with a Blue background. |
|
Definition
|
|
Term
|
Definition
|
|
Term
|
Definition
|
|
Term
| On the Grand MA, this is the default store option. It stores all active values. |
|
Definition
|
|
Term
| On the Grand MA, this type of store will store all values, regardless of their current state, for every fixture and channel in your show. |
|
Definition
| Store All. This is a "Stop" or "Block" |
|
|
Term
| Name two types of triggers that can start a cue on the Grand MA. |
|
Definition
|
|
Term
| "The time it takes all channels of a cue that can fade to change their DMX value to a new level" is the definition of a _________ fade time. |
|
Definition
|
|
Term
| "Delays the change in any channels that can NOT fade" is the definition of a ____________. |
|
Definition
|
|
