Term
| Water Glycol Fire Extinguisher |
|
Definition
1. Verify it is secure in its proper location.
2. Verify the wire seal is intact.
3. Verify the carbon dioxide cartridge is visible through the small hole in handle. |
|
|
Term
|
Definition
1. Verify it is secure in its proper location.
2. Verify pin and deal are intact.
3. Verify the needle of the gauge is in GREEN zone.
4. Verify the hose is properly attached and unobstructed. |
|
|
Term
| Fixed Halon Fire Extinguisher |
|
Definition
1. Verify the needle of the gauge is in the GREEN zone.
2. Verify there is no trash or items around the extinguisher or obstructions around nozzle. |
|
|
Term
|
Definition
1. Verify it is secure in its proper location.
2. Verify the red light flashes at intervals of 10 seconds or less
3. Verify the "Emergency Use Only" seal is intact. |
|
|
Term
|
Definition
1. Verify it is secure in its proper location.
2. Verify the needle of the gauge is in the red "FULL" band.
3. Verify the carrying strap is attached.
4. Verify two masks are present in each tote bag.
5. Verify masks and tubing are not torn.
6. Verify both bayonet fittings are attached to an outlet. |
|
|
Term
|
Definition
1. Verify it is secure in its proper location.
2. Squeeze the handle to verify an audible click and the battery monitor is flashing green. |
|
|
Term
|
Definition
1. Verify it is secured in its proper location.
2. Verify seals are intact. |
|
|
Term
| Protective Breathing Equipment (PBE) |
|
Definition
1. Verify it is secured in its proper location.
2. Verify seals are intact. |
|
|
Term
|
Definition
1. Verify it is secured in its proper location.
2. Verify the content list is present.
3. Verify the seals are intact.
4. Verify expiration date has not expired. |
|
|
Term
| Emergency Locator Transmitter |
|
Definition
1. Verify it is secure in its proper location.
2. Verify the ON/OFF/ARMED switch is in the ARMED position. |
|
|
Term
| Automated External Defibrillator |
|
Definition
1. Verify it is secure in its proper location.
2. Check the status indicator to ensure that it is green without a black "X".
3. Verify the seal is intact.
4. Verify Ready Kit pouch is attached and seal is intact. |
|
|
