Term
| An audio sub-group is the same as a channel group |
|
Definition
|
|
Term
| What mode will cause the faders from the OPPOSITE Focus to appear at the V-pots |
|
Definition
|
|
Term
| An audio subgroup may have processing inserted on it |
|
Definition
|
|
Term
| The Aux tracks do not need to be routed to Analog Outputs |
|
Definition
|
|
Term
| When Channels are grouped within Logic, many things can be licked via the Group Setting Window, however only 3 are liked by default. They are Volume, Mute and |
|
Definition
|
|
Term
| To set up a Channel Group for the Console you must press the |
|
Definition
|
|
Term
| You do not news to use the Select buttons to choose your Channels for your Group |
|
Definition
|
|
Term
| To work with a new Group you will need to press what buttons? |
|
Definition
| Up/Down cursors next to mode |
|
|
Term
| When the Group Assign function is active, Linkable group parameters are listed where |
|
Definition
|
|
Term
| If you have a Fader Group on channels 1-6, then moving any of those faders will move all of them |
|
Definition
|
|
Term
| Where in the Matrix Remote Software will you name your session |
|
Definition
|
|
Term
| What button on the console will open up TR menus in the soft keys? |
|
Definition
|
|
Term
| Before a Snapshot may be recalled, what button must be pressed to "arm" the system |
|
Definition
|
|
Term
| To recall Auto Reset Data for ALL channels you must press |
|
Definition
|
|
Term
| When preforming a Recall what parameter listed below will not Auto Reset? |
|
Definition
|
|
Term
| When adjusting setting that need manual recall the color red means turn the knob to the _____ and green means turn the knob to the ___ |
|
Definition
|
|
Term
| The tab in the Matrix Remote Software that deals with the patching of the DYN Outboard Gear is called |
|
Definition
|
|
Term
| Once you patched CL (Compresser 1) to an an Analog Channel, it is still available for other Channels |
|
Definition
|
|
Term
| After you have patched an outboard DYN effect you must do what to complete the process |
|
Definition
| Press the insert button on Analog Channel |
|
|
Term
| How do you activate an FX Send on the Matrix |
|
Definition
|
|
Term
| The automation Mode in Logic that will destructively write Data, even if you don't move or touch anything is called |
|
Definition
|
|
Term
| The automation Mode in Logic that will only write Data when you change a parameter (system will go back to read when you stop touching the console) is called |
|
Definition
|
|
Term
| The automation Mode in Logic that will read Data until you touch something, but then continue to write even after you let go is |
|
Definition
|
|
Term
| One way to set your desired Automation Mode from the Console you will need to press the ____ button found in the Softkey Set |
|
Definition
|
|
Term
| If you change a Fader Level in while in touch Mode then let go of the Fader, it will |
|
Definition
| Keep at that Level but not write New Data |
|
|
Term
| If you change a Fader Level in Latch Mode then let go of the Fader, it will |
|
Definition
| keep at that level and keep writing New Data |
|
|
Term
| Is there anyway to select all channels to change their automation status from the console |
|
Definition
| ?? No it must be down from the DAW |
|
|
Term
| If you select one channel from a fader group to set an automation status you are |
|
Definition
| Affecting that one one channel, no matter the linking setup |
|
|
Term
| Does the matrix have an onboard automation system |
|
Definition
|
|
Term
| If you answered no, how are all the analog faders automated?? |
|
Definition
| Create 16 MIDI Tracks in the DAW and write your DATA on the DAW side |
|
|
Term
| When the Automation system is running will you see the Analog Faders move? |
|
Definition
|
|
Term
| When the Automation System is in ABS, are the analog Faders Usable?? |
|
Definition
|
|
Term
| The producer loves everything, but wants the vocals louder overall. What type of automation mode, in general, will help you accomplish this task? |
|
Definition
|
|
Term
| Is there a Trim Mode in Logic? |
|
Definition
|
|
Term
| What 2 things are true when in Trim Mode |
|
Definition
The analog Faders will Playback Automation Data
The analog Op/Amps will read Midi Track Data
The analog Fader is able to control the overall level of the chanel op/amps
The trim data is being recorded to Midi Tracks in Logic |
|
|
