Term
| Acceptance Checklist must be accomplished when... |
|
Definition
1. After a Safety Checklist
2. Upon returning to the aircraft after a leaving aircraft checklist has been accomplished
3. whenever an aircraft swap occurs
4. when a change of one or both flight crew members occurs |
|
|
Term
| Preflight Inspection.................... |
|
Definition
|
|
Term
| Gear & Safety Pins..................... |
|
Definition
... __ Removed
__ On Board
1. the person preflighting ensures they are removed
2. Both crewmembers verify 4 pins are on board |
|
|
Term
| Pitot Covers.............................. |
|
Definition
... ON BOARD
3 are removed and stored on board |
|
|
Term
| Emergency Equipment................ |
|
Definition
... Checked
A. Life Vests (3)
B. Crew Escape Hatch (1) (look up?)
C. Escape Rope (1)
D. Crash Axe (1)
E. Halon Fire Extinguisher (1)
F. PBE Unit (1)
G. Oxygen Masks (3) |
|
|
Term
| Selector Valves (___-___)........... |
|
Definition
...(401-464) Normal
up and guarded |
|
|
Term
| Selector Valves (___-___).......... |
|
Definition
| ...(465 & Subsequent) NOT INSTALLED |
|
|
Term
| Crew O2 & Masks.................... |
|
Definition
|
|
Term
|
Definition
|
|
Term
| Electrics................................... |
|
Definition
... Checked
1. DC service switch: OFF
2. Battery Master: ON
3. IDG disconnects: Guarded
4. APU GEN switch: Off/Reset
5. Switchlights: Flush, No lights |
|
|
Term
Fire Protection and Extinguishing Tests....
(also Expanded in the next few slides) |
|
Definition
|
|
Term
| Fire Detection............................ |
|
Definition
...Checked
loop switches (5): Both |
|
|
Term
| Lights...................................... |
|
Definition
... As Req
NAV lights: ON; LOGO lights: as req |
|
|
Term
| Fuel......................................... |
|
Definition
...Checked
1. L & R Boost pump switchlights: selected out and INOP lights are illuminated amber
2. Gravity XFLOW switchlight: Select out, light extinguished
3. XFLOW AUTO OVERRIDE switchlight: Selected out and light extinguished |
|
|
Term
| Duct Test........................ |
|
Definition
... Complete
Turn knob to test and note:
AURAL: tripple chime / "bleed air duct"
ED1: L&R 10th DUCT, L&R 14th DUCT, Anti-Ice Duct
ED2: DUCT TEST OK advisory
BLEED AIR PANEL: 4 fail switchlights
Anti-Ice Panel: 1 fail switchlight
release knob and they all go away
|
|
|
Term
| Bleeds..................................... |
|
Definition
...Set
1. Bleed Air L & R 14th stage Switchlights: IN/ (open)
2. Bleed air 14 Stage ISOL switchlight: Out/ (Closed)
3. Bleed Air L & R 10th Stage Switchlights: Out/ (Closed) |
|
|
Term
| APU........................................ |
|
Definition
|
|
Term
| Start Panel................................ |
|
Definition
... Checked
All start panel switchlights selected out, no lights |
|
|
Term
| Hydraulic Test..................... |
|
Definition
...Complete
1. Hyd synoptic page
2. all hyd switches up/on (3a off)
3. check ed 2 for qty's 45-85%/green/3000psi
4. hyd switches down (auto/on)
5. 3a=3000psi, cancel master caution |
|
|
Term
| Hydraulics................................. |
|
Definition
... Checked
all down, auto/on/auto/auto |
|
|
Term
| ELT Panel................................. |
|
Definition
...Checked
1. ELT: ARM/Reset
2. PASS OXY guarded/no light (careful) |
|
|
Term
| Pressurization........................... |
|
Definition
...Checked
1. MAN/ALT: Centered
2. EMER DEPRESS switchlight: out/no light
3. PRESS CONT switchlight: out/ no light
4. MAN RATE knob: Full DECREASE |
|
|
Term
| Air Conditioning........................ |
|
Definition
...CHECKED
1. L&R PACK switchlights: as req
2. RAM AIR switchlight: out/ no light
3. Temp ctrl MAN switchlights: out/ no light
4. CARGO: FAN
5. ANTI-ICE WING switch: OFF
6. ANTI-ICE, COWL LH&RH: OFF |
|
|
Term
| Ice Detector Test.................. |
|
Definition
...COMPLETE
1. ANTI-ICE, DET TEST switch: select in
A. ICE light on
B. Advisory message ED2 |
|
|
Term
| Emergency Lights...................... |
|
Definition
|
|
Term
| Standby Compass...................... |
|
Definition
...CHECKED
compare with PFD/MFD |
|
|
Term
| ROLL SEL................................. |
|
Definition
|
|
Term
| Stall Test........................... |
|
Definition
|
|
Term
| GPWS Test................................ |
|
Definition
|
|
Term
| Flight Control Panel.................... |
|
Definition
...Checked
AP DISC switch bar: engage/up
Flight Directors: OFF |
|
|
Term
| Nosewheel Steering................... |
|
Definition
|
|
Term
| Side Panels.............................. |
|
Definition
...CHECKED
CA and FO WIPER switches: OFF/PARK
STALL PTCT PUSHER switches: ON
CA and FO's Lighting panels: as req |
|
|
Term
| Clocks.................................... |
|
Definition
...SET
make sure all the displays are accurate |
|
|
Term
| EFIS Control Panels................... |
|
Definition
...CHECKED
1. CA and FO display ctrl panels:
A. brg pointers, format, range, nav as needed
2. CA and FO Air Data Reference panels:
A. DH:Activate, set to zero, remove from PFD
B. MDA: remove from PFD
C. RA TEST: press and note 50' inc
D. BARO: set to altimeter setting
3. CA and FO display reversionary panel: NORM
|
|
|
Term
| Instrument Panels...................... |
|
Definition
...CHECKED
PFD and MFD: checked for normal ind |
|
|
Term
| CVR Test............................ |
|
Definition
...COMPLETE
Test button: press and hold for 5 sec:
Verify green light remains lit |
|
|
Term
| EICAS & Stby Instruments........... |
|
Definition
...CHECKED
1. ED1 & ED2 normal
2. Stby attitude indicator: Erect/no flags
3. Stby altimeter and airspeed indicators:
set and crosschecked |
|
|
Term
| MLG Bay Overheat Test........ |
|
Definition
...COMPLETE
1. MLG BAY switch: Hold to OVHT position
A. Aural: Tripple chime, "gear bay overheat"
B. ED1: MLG BAY OVHT warning msg
2. MLG BAY switch: release/message out
3. OVHT TEST switch: hold WARN/FAIL
A. Single Chime
B. ED 1: MLG OVHT FAIL caution msg
4. OVHT TEST switch: release, message out |
|
|
Term
| Upper Pedestal.......................... |
|
Definition
...CHECKED
1. MUTE HORN switch: guarded, light out
2. BTMS WARN RESET: check ed1 brake temps, call mx if required
3. ANTI-SKID switch: ARMED
4. TERRAIN override and flap override switches: guarded, select out, no lights |
|
|
Term
| Thrust Lever Quadrant............... |
|
Definition
...CHECKED
1. PITCH & ROLL Disc handles: normal position
2. Spoilers Switch: AUTO
3. THRUST REVERSERS: LH and RH switches: ARMED
A. check ED2: L&R REV ARMED advisory msgs
4. EMER STOW switchlights: Select out, no lights
5. FLIGHT SPOILERS handle: Retract
6. Thrust Levers: SHUT OFF
7. Flap Lever: FLAPS 0' |
|
|
Term
| TCAS Test................................ |
|
Definition
|
|
Term
| PA System Test.................. |
|
Definition
|
|
Term
| Avionics.................................. |
|
Definition
|
|
Term
| Stab & Mach Trim................ |
|
Definition
|
|
Term
| APR Switch......................... |
|
Definition
|
|
Term
| Engine Speed Switches.............. |
|
Definition
|
|
Term
| Rudder & Aileron Trim Test...... |
|
Definition
...COMPLETE
1. AIL TRIM and RUD TRIM:
a. Check on ED2 for free movement in BOTH directions and then center the control |
|
|
Term
| Control Wheel Stab Trim Disconnect Switches............................ |
|
Definition
|
|
Term
| Yaw Damper............................ |
|
Definition
...ENGAGED
1. YD1 and YD2: Engage
2. ED1: YAW DAMPER caution removed
3. PFD 1&2: YD message removed
4. ED2: YD1 INOP and YD2 INOP status removed |
|
|
Term
| Source Selector Panel................ |
|
Definition
...NORMAL
1. ATT/HDG knob: NORM
2. EICAS knob: NORM
3. AIR DATA knob: NORM
4. DSPL CONT knob: NORM |
|
|
Term
| Lower Pedestal......................... |
|
Definition
...CHECKED
1. Observers ACP: as req, ensure INT/SVC
2. LANDING GEAR MAN RELEASE: STOWED
3. ADG Manual Deploy Handle: Stowed |
|
|
