Term
| What metal is lasher wire comprised of? |
|
Definition
|
|
Term
| What metal is strand comprised of? |
|
Definition
|
|
Term
| What is the breaking for 1/4 inch strand? |
|
Definition
|
|
Term
| What is the breaking weight for 3/8 inch strand? |
|
Definition
|
|
Term
| What is used to connect two devices together? |
|
Definition
| Housing-to-Housing adaptor |
|
|
Term
| Warning tape is buried at a depth of |
|
Definition
|
|
Term
| The tension in the cable caused by the weight of the cable on the reel and the reel brakes is called? |
|
Definition
|
|
Term
| Expansion loops are formed with what device? |
|
Definition
|
|
Term
| Before passing the Lasher around a pole, what must be attached? |
|
Definition
|
|
Term
| How should the Lasher be pulled before removing the mechanical bender? |
|
Definition
|
|
Term
| The excess cable left at each splicing location is known as an? |
|
Definition
|
|
Term
| What is the, should be distance between the strap and lashing wire clamp on the strand? |
|
Definition
|
|
Term
| What should the distance between the strap and the bend in the cable at the expansion loop be? |
|
Definition
|
|
Term
| Name 5 different type of guy wires: |
|
Definition
| Head, Terminal, Side, Pole-to-Stub, Pole-to-Pole, Sidewalk and Storm |
|
|
Term
| Name 3 types of anchors used: |
|
Definition
Screw,
Rock,
and Never-Creep (plate-type) |
|
|
Term
|
Definition
|
|
Term
| What is used to connect two different sizes of coax cable together? |
|
Definition
|
|
Term
| During strand installation what device is used to prevent dangerous strand sag? |
|
Definition
|
|
Term
| What is used to prevent unwanted pay-off of strand from the cable trailer or reel strand? |
|
Definition
|
|
Term
| What are the two different strand installation methods? |
|
Definition
| Stationary Reel (back-pull) and Moving Reel (drive -off) |
|
|
Term
| How far from the pole should strand splices be? |
|
Definition
|
|
Term
| What is used to measure the pulling tension applied to cables? |
|
Definition
|
|
Term
| What are used to ensure that the cables are not over tensioned during pulling? |
|
Definition
|
|
Term
| What is used to guide cables from the cable trailer to the strand? |
|
Definition
|
|
Term
| What is used to position multiple cables that are being lashed? |
|
Definition
| Cable Positioner (Magic Box) |
|
|
Term
| When the loop location is dedicated by signal flow direction of the feeder cable? |
|
Definition
|
|
Term
| Place two expansion loops at each pole when the span is ___ feet or longer? |
|
Definition
|
|
Term
| What is it called when two perpendicular strands end at the same pole? |
|
Definition
|
|
Term
| The strain relief loop for fiber should drop how far below the strand? |
|
Definition
|
|
Term
| During the fiber construction process how much excess cable is installed? |
|
Definition
|
|
Term
| What is the max cable bundle diameter for Lasher Type J |
|
Definition
|
|
Term
| What is the max cable bundle diameter for Lasher Type S |
|
Definition
|
|
Term
| What is the max cable bundle diameter for Lasher Type D |
|
Definition
|
|
Term
| Cable blocks should be placed on the strand every __ to ___ feet? |
|
Definition
|
|
Term
| Place corner blocks art all corners greater than ___ degrees in the pole line. |
|
Definition
|
|
Term
| Cable tails need to be at least ___ feet in length. |
|
Definition
|
|
Term
| What are the 3 situations when double lashing is essential? |
|
Definition
| Two or more cables, All trunk cables, and At all street and RR crossings |
|
|
Term
| What is the utility color code for telecommunications ? |
|
Definition
|
|
Term
| What is the utility color for Sewer? |
|
Definition
|
|
Term
| Name the 5 underground construction methods (plant) |
|
Definition
| Trenching, Vibratory Plowing, Rip and Plow, Conventional Boring and Directional Boring. |
|
|
