Term
| What is the cycle time for Lt Ice with the boots in Auto? |
|
Definition
6 sec per set of boots (Outboard, Inboard, Tail)
162 sec rest period (total of 180 sec) |
|
|
Term
| What is the cycle time for Hvy Ice for the boots in Auto? |
|
Definition
6 sec per set (Outboard, Inboard, Tail)
42 sec rest (60 sec total) |
|
|
Term
| How do you manually inflate the boots? |
|
Definition
Select Man
Push the buttons
(Monitor switch should be on) |
|
|
Term
| What kind of icing protection do the engines have? |
|
Definition
1. INLET - Electric mats inside the intake. Powered by the altenator in the PGB. (Np must be above 77%).
2. ENGINE - Blled air which heats the lip and guide vanes. |
|
|
Term
| If a generator fails, how can power be supplied to the corresponding INLET? |
|
Definition
|
|
Term
| What is the cycle time for the propeller heat in Fast? |
|
Definition
Each pair of props heats for 10 sec, then 30 sec rest period.
(Total of 60 sec between cycles for each pair) |
|
|
Term
| What is the cycle time for the propeller heat in Slow? |
|
Definition
Each pair heats for 20 sec, and no rest period.
Total of 60 sec between cycles, but heats for longer.
Recommended for temps below -10 deg C. |
|
|
Term
| T or F. In the event of a generator failure, the PGB anti-ice altenator can be used as an alternate source of power. |
|
Definition
| True. Can select the corresponding T/R. |
|
|
