Term
| 1. When choosing a mic base it on what three things |
|
Definition
| polar pattern, frequency response, and dynamic range |
|
|
Term
|
Definition
|
|
Term
|
Definition
| output of mic ovr its operating range of frequencies |
|
|
Term
|
Definition
| how much sound pressure can a mike take before distortion happens |
|
|
Term
| a stereo chorus is split into three tracks |
|
Definition
| a dry track and a left and right track that has been pitch shifted or (tuned 50 above and below dry track) |
|
|
Term
|
Definition
| on a syntesizer-can pitch shift in real time so you can bend notes, |
|
|
Term
|
Definition
| achieved by using two tape recorders |
|
|
Term
| ______ gives you an echo effect |
|
Definition
|
|
Term
| how can an audio engineeer add sound reflection |
|
Definition
|
|
Term
| Attenuate is a level setting measured in |
|
Definition
| Decibels... pulls down the level and lessens signal stregnth...used when voice or instrument is too loud |
|
|
Term
| a band is measured in and is a |
|
Definition
| hertz p/s and is a single filter within an equalizer |
|
|
Term
|
Definition
| another term for Q value; same as bandwidth and measured in octaves |
|
|
Term
| In addition to the peaking filter, a parametric equalizer also has what three things |
|
Definition
| Q value, resonance and bandwith which offers gain control |
|
|
Term
| the element of a microphone means |
|
Definition
| the part of the diaphram that is doing the transducing |
|
|
Term
| a microphone pre-amplifier is used to |
|
Definition
| bring the very low signal of the microphone up to line level |
|
|
Term
| in a microphone what does the diaphram do |
|
Definition
| component that moves with the sound waves causing other parts to vibrate making an electric current |
|
|
Term
|
Definition
| a unit of measurement in an electric circuit |
|
|
Term
| dynamic microphone runs on |
|
Definition
|
|
Term
| most common type of dynamic microphone is made with a |
|
Definition
|
|
Term
| a condenser microphone uses what kind of induction |
|
Definition
|
|
Term
| a condenser mic contains a coil that uses what type of power |
|
Definition
|
|
Term
|
Definition
|
|
Term
| how to solve proximity effect |
|
Definition
cut off at 40hz or 80hz on mic -
uni directional mike solve prox effect with roll off filter |
|
|
Term
|
Definition
| how much sound is captured by the mic |
|
|
Term
|
Definition
| resistance measured in OHM's |
|
|
Term
| A balanced signal is achieved by |
|
Definition
| tip ring sleeve, XLR and three pin (all of the above) |
|
|
Term
|
Definition
|
|
