Term
|
Definition
| Standard test method for total evaporable moisture content of aggregate by drying |
|
|
Term
| Larger particales of coarse aggregate, especially thoes larger than 50mm(2in) will... |
|
Definition
| require greater time for the moisture to travel from the interior to the surface. |
|
|
Term
|
Definition
| accurate, readable and sensitive to withing 0.1% of the test load at any point within the range of use. |
|
|
Term
| ASTM ___ - Standard test method for total evaporable moisture content of aggregate by drying |
|
Definition
|
|
Term
| Source of Heat (specifications) |
|
Definition
| Ventilated oven capable of maintaining temperature surrounding the sample at 110+/-5C (230+/-9F), Other sources may be used, such as hot plate, heat lamps or ventilated microwave oven. |
|
|
Term
| Sample Container (specifications) |
|
Definition
| A container not affected by the heat, of sufficient volume to contain the sample without danger of spilling and depth of sample will not exceed 1/5th of the least lateral dimension. |
|
|
Term
|
Definition
| Determine the mass of the sample to the nearest 0.1% |
|
|
Term
|
Definition
|
|
Term
|
Definition
| The Sample is thoroughly dry when further heating causes less than 0,1% additional loss in mass |
|
|
Term
| The sample is thoroughly dry when... |
|
Definition
| further heating causes less than 0,1% additional loss in mass |
|
|
Term
|
Definition
| Determine the mass of the dried sample to the nearest 0.1% after it has cooled sufficiently not to damage the balance |
|
|
Term
| Calculate total evaporable moisture content |
|
Definition
|
|
Term
| Surface moisture content is |
|
Definition
| equal to the difference between the total evaporable moisture content and the absorption. With all values based on the mass of a dry sample. |
|
|
Term
| The single operator standard deviation for moisture content of aggregates has been found to be |
|
Definition
|
|
Term
| The results of two properly conducted tests by the same operator in the same laboratory on the same type of aggregate sample should not differ by more than |
|
Definition
|
|
Term
|
Definition
| Total Evaporable Moisture Content of Aggregate by Drying |
|
|
Term
| AASHTO T-____ - Total Evaporable Moisture Content of Aggregate by Drying |
|
Definition
|
|
Term
| Report percent moisture to the nearest |
|
Definition
|
|
Term
| Constant weight (Definition) |
|
Definition
| when further drying will cause less than 0.1% additional loss in mass |
|
|
Term
| A calibration check of the equipment should be performed ______ |
|
Definition
|
|
