Term
| unless otherwise told by ATC assume ____ holding pattern |
|
Definition
|
|
Term
| standard no-win lenght of the inbound leg of the holding pattern is __ at or below ___ feet, and ___ above ____ |
|
Definition
1 minute; 14,000; 1.5 minutes; 14,000 (151) |
|
|
Term
| ATC should issue holding instructions at least __ minutes before reachigna clearance limit fix |
|
Definition
|
|
Term
| when an a/c is __ minutes or less from a clearance limit and a clearance limit beyond the fix has not been received, the pilot is expected to start a speed reduction so that the a/c will cross the fix at or below the max holding airspeed. |
|
Definition
|
|
Term
| if holding instructions have not been received upon arrival at the fix, hold in accordance with procedures in ___ |
|
Definition
|
|
Term
| max holding airspeed at MHA through 6000' MSL is |
|
Definition
|
|
Term
| max holding airspeed above 6,000' MSL through 14,000' is |
|
Definition
|
|
Term
| max holding speed above 14,000' MSL |
|
Definition
|
|
Term
| you are considered established in holding upon? |
|
Definition
initial passage of the holding fix (154) |
|
|
Term
| unless correcting for known winds, make all turns during entry and while holding at _ degrees per second or __ degree bank angle whichever is lower |
|
Definition
|
|
Term
| true or false: on the intial outbound leg, you may exceed the appropriate time for the altitude in order to make the inbound leg the appropriate time |
|
Definition
false- on the initial outbound leg, don't exceed the time for the altitude, but adjust subsequent outbound legs to meet the required inbound time (156) |
|
|
Term
| begin timing outbound when over or abeam the fix. if you cannot determine the abeam position, start timing when... |
|
Definition
wings level outbound (156) |
|
|
Term
| begin inbound timing when... |
|
Definition
|
|
Term
| true or false: if established in a holding pattern that has a published minimum holding altitude, and assigned an altitude above that published altitude, pilots may descend to the published altitude minimum holding altitude when cleared for the approach, unless specifically restricted by ATC |
|
Definition
|
|