Term
| If you are receiving radar vectors in the low altitude structure, ATC expects you to fly the _______ of the approach. |
|
Definition
low altitude version
(178) |
|
|
Term
| What should you do if you receive an unclear or incomplete approach clearance. |
|
Definition
Query the controller
(178) |
|
|
Term
| There are two broad categories of low altitude approaches: |
|
Definition
course reversals and procedure tracks
(179) |
|
|
Term
| Unless ATC specifically clears you otherwise, you are expected to fly to the... |
|
Definition
IAF and execute the full instrument approach procedure as published
(179) |
|
|
Term
| Some approaches depict only a final approach segment, starting at the FAF. In these cases, ____ is required to ensure you are properly aligned with the final approach course at the appropriate altitude |
|
Definition
|
|
Term
| When ATC clears you for the approach, maintain the ______ altitude until established on a segment of the published IAP. |
|
Definition
|
|
Term
| Prior to reaching the initial approach fix, the pilot must slow to _________. Use ________ if the first is not specified for your aircraft. |
|
Definition
aircraft maneuvering speed; holding airspeed
(180) |
|
|
Term
| There are two common types of course reversals: the _______ and the _______ |
|
Definition
procedure turn (PT); holding pattern in lieu of procedure turn (HILO PT)
(180) |
|
|
Term
| Do not execute a procedure turn or HILO PT in the following situations: |
|
Definition
S- Straight-in
N- NoPT
E- Establishing in holding, subsequently cleared the approach and the holding course is the same as the procedure turn course
R- Radar vectors
T- Timing approach |
|
|
Term
| True or false: In a situation where you do not execute a PT or HILO PT, proceed over the FAF at the published FAF altitude and continue inbound on the final approach course without making a procedure turn, holding pattern, or any other aligning maneuver before the FAF unless otherwise cleared by ATC. |
|
Definition
|
|
Term
| Procedure turns are depicted in the plan view of U.S. government charts with a ____ symbol |
|
Definition
|
|
Term
| Procedure turns may be safely flown at speeds up to ___ KIAS provided the pilot takes into consideration all factors which may affect the aircraft‘s turn performance (e.g., winds, TAS at altitude, bank angle, etc.). |
|
Definition
|
|
Term
| The FAA recommends a maximum airspeed of ___ KIAS while performing procedure turn course reversals, and when possible, USAF aircraft should also observe this speed restriction. |
|
Definition
|
|
Term
| On a procedure turn, Tte remain within distance is measured from the _________ unless the IAP specifies otherwise. |
|
Definition
|
|
Term
| If you elect a teardrop entry to a procedure turn, your teardrop course must be within __ degrees of the procedure turn course |
|
Definition
|
|
Term
| Begin timing once you are _______ the procedure turn fix. If you cannot determine this position while in the turn, start timing after _______. |
|
Definition
outbound abeam; completing the outbound turn
(186) |
|
|
Term
| If your heading is within __° of the outbound procedure turn course, you may use normal lead points to intercept the procedure turn course outbound |
|
Definition
|
|
Term
| Do not descend from the procedure turn fix altitude (published or assigned) until _____. If unable to determine this position, start descent after _______ |
|
Definition
abeam the procedure turn fix heading outbound; completing the outbound turn
(187) |
|
|
Term
| Do not descend from the procedure turn completion altitude until _______ |
|
Definition
established on the inbound segment of the approach
(187) |
|
|
Term
| Absence of a chart note or a specified minimum altitude adjacent to the PT fix is an indication that descent to the procedure turn altitude can commence immediately upon __________, regardless of the direction of flight |
|
Definition
crossing over the PT fix
(187) |
|
|
Term
| True or false: for the 45/180 and 80/260 methods, intercept and maintain the procedure turn course outbound as soon as possible after passing the procedure turn fix |
|
Definition
|
|
Term
| for the 80/260 method, to begin the reversal maneuver, make an 80° turn away from the outbound track toward the maneuvering side followed by an immediate 260° turn in the _____ direction to intercept the inbound course |
|
Definition
|
|
